You can connect to the positive and negative leads to one of two pads as shown in the image below.
To power the LEDs mounted to a Saber Tri-LED base in series, you will need to apply a solder dot to the two br...
You can connect to the positive and negative leads to one of two pads as shown in the image below.
Wiring diagrams showing how to connect the LEDs on the SR-02 7 LED Round Assembly in series and in parallel.
Connecting to the on-board thermistor for the SR-02 7 LED Round Assembly.
Connection diagram for the Xitanium LED120A0700C24F and LED120A0350C33F drivers. Note that you need to use ...