Luxeon Star LEDs

Support Center

Find articles, help, and responsive support.

Xitanium Hookup Diagram

Last Updated: May 21, 2014 11:13PM MDT

Connection diagram for the Xitanium LED120A0700C24F and LED120A0350C33F drivers.

Note that you need to use a 1365323-1 wiring harness to connect the LED to the driver. This wiring harness has an AMP connector on both ends. As the LEDs that we supply do not have a connector, just cut off the connector from one end and solder the wires directly to the LED.

Both wires on the 1365323-1 wiring harness are black, so be sure to check that you have the wires connected to the LED in the correct polarity before you power the driver.


Xitanium Wiring Diagram

Contact Us

  • Post a Community Question
  • Email Us