A resistor is NOT required (nor recommended) if you are using a driver. E.g., BuckPuck, BoostPuck, PowerPuck, BuckToot, MicroPuck, BuckBlock, FlexBlock or Xitanium.
You can connect the output of the drivers directly to the LEDs you are powering.
A resistor is NOT required (nor recommended) if you are using a driver. E.g., BuckPuck, BoostPuck, PowerPuck, BuckToot, MicroPuck, BuckBlock, FlexBlock or Xitanium.
You can connect the output of the drivers directly to the LEDs you are powering.